Vol. 24 No. 2 (2022): CIGR Journal

I-Land and Water Engineering

Spatial Analysis For Simulation The Changing Of Inland Water Depth: A Case Study In The Mekong Delta, Vietnam

Vo Quang Minh, Truong Chi Quang, Nguyen Thi Hong Diep, Phan Kieu Diem
- 2-7477
The evaluation of two promising rainfed wheat cultivars as affected by different seeding rate in conventional and conservation tillage systems

Farshid Khodadoost, Babak Pasari, Abdolvahab Abdulahi, Asad Rokhzadi, Khosro Mohammadi
- 1-7383

II-Farm Buildings and Construction

Effect of Wood shavings on the Temperature Profile of Livestock Waste during Composting with Daily Turning

Ngwa Martin Ngwabie, Tabe David Tiku, Lamfu Fabrice Yengong, Ebot Veronica Manga
- 3-7433

III-Equipment Engineering for Plant Production

A comprehensive look to the universal self-propelled rice transplanters using Analytic Hierarchy Process (A case of developing country)

Mohammad Sadegh Allahyari, Saeed Firouzi, Bahram Pourrahman, Soroush Marzban
- 6-7167
Optimization of a Solar Light Trap for Controlling the Pest in Rice Field

Muhammad Ashik-E- Rabbani, Md. Samiul Basir, Md. Aliuzzaman, Anisur Rahman
- 5-6807
Influence of the nozzle type, air-assisted velocity, and wind velocity on the measurements of spray drift potential of boom sprayers

Firozeh Solimani, Majid Rahnama, Mohammad Amin Asoodar, Mahmoud Ghasemi Nejad Raini, Mohammad Ali Hormozi
- 7-7453
Development a cleaner for thresher of sunflower grain and optimization with RSM

esmaeil chavoshgoli, shamsollah abdollahpour, hamidreza ghassemzadeh
- 4-6033

IV-Energy in Agriculture

Evaluation of Energy Consumption Pattern in Rice Processing Using Taguchi and Artificial Neural Network Approaches

Mayowa Saheed SANUSI, Rahman Akinoso
- 9-7235
Physico-Mechanical and Fuel Properties of Sawdust Briquettes using Abelmoschus esculentus Waste as a Binder

Chukwuemeka Ohagwu, joel Nwakaire, Desmond Amaefule, Cosmas Anyanwu, Chiadikobi Nwaezeh
- 8-7121

V-Management, Ergonomics and Systems Engineering

Explanation of evaluation criteria for rice weeding machine in paddy fields of Iran

adel ranji, Davood MohamadZamani, mohamadhasan Gholami Pareshkoohi, mohammad ghahdarijani
- 10-7099

VI-Postharvest Technology and Process Engineering

Modeling and Simulation of Efficiency of Cassava Attrition Peeling Machine

Chijioke, Osinachi Onwuka, Echezona, Nduka
- 16-7729
Development of a machine vision-based colorimetric system for bell peppers (Capsicum annuum L.) using intelligent modelling techniques

Khaled Mohi-Alden, Mahmoud Omid, Mahmoud Soltani Firouz, Amin Nasiri
- 24-7657
COMPUTATIONAL FLUID DYNAMICS AND PERFORMANCE EVALUATION OF A CHIMNEY SOLAR DRYER FOR CHILLI PEPPER

Francis Kumi
- 15-7005
Silica nanoparticle: a potential new insecticide for beet armyworm, Spodoptera exigua Hubner (Lep.: Noctuidae) control

Majid Alimohamadian, Shahram Aramideh, Shahram Mirfakhraie, Maryam Fourouzan
- 22-7515
Comparative Analysis of Mechanical Properties of Two Varieties of Periwinkle Relevant to Its Processing Equipment Design

INEMESIT EDEM EKOP, Kayode Joshua Simonyan, Udochukwu Nelson Onwuka
- 12-6071
Design, development and evaluation of a rotary potato sorting machine

Mohammad Reza Bakhtiari
- 20-7299
DEVELOPMENT OF AN IMPROVED DOUBLE BURNER NATURAL DRAFT BIOMASS COOKSTOVE

SULEIMAN USMAN YUNUSA
- 18-7279
Classification of wheat varieties by PLS-DA and LDA models and investigation of the spatial distribution of protein content using NIR spectroscopy

hossein bagherpour
- 17-7205
Freshness and quality assessment of parsley using image processing and artificial intelligence techniques

Mohammad Hosseinpour Zarnaq, Mahmoud Omid, Mahmoud Soltani Firouz, Mostafa Jafarian, Pourya Bazyar
- 25-7687
Thermodynamic properties and moisture sorption isotherms of Matricaria pubescens from Algerian Sahara

amel saad, Boumediene Touati, Abdelhadi Seghir, Asma Abdenebi
- 26-7089
Influence of moisture content on physico-mechanical and color characteristics of yellow, purple and black wheat (Triticum aestivum) Physical and Mechanical properties of pigmented wheat

Subhamoy Dhua, Ankan Kheto, vijay Singh Sharanagat, Prabhat K Nema
- 23-7615
Predictive Models for Head Rice Yield and Breakage Ratio Under Optimal Steam Parboiling Variables for Faro 44 Rice Variety

Charles Obiora Nwajinka, Bonaventure Muochebe, Ernest Ifeanyichukwu Nwatu
- 14-6881
Modeled dryer using an automatic control system for agricultural products

Oluyemisi Adeola Adejumo, Adebiyi Adebayo Ojo, Aye Taiwo Ajiboye, Kayode Oje
- 21-7509
Effect of grain moisture and clearance of machine on mechanical damage of processed paddy

salih kadhim Alwan
- 13-6473
The Antioxidant Properties of Compressed Persimmon Fruit using Putrescine Coatings and Polyamine Films

Mohsen Azadbakht, Sajad Jafarzadeh, Faryal Varasteh, Mohammad Vahedi Torshizi
- 19-7291

I-Land and Water Engineering

Spatial Analysis For Simulation The Changing Of Inland Water Depth: A Case Study In The Mekong Delta, Vietnam

The evaluation of two promising rainfed wheat cultivars as affected by different seeding rate in conventional and conservation tillage systems

II-Farm Buildings and Construction

Effect of Wood shavings on the Temperature Profile of Livestock Waste during Composting with Daily Turning

III-Equipment Engineering for Plant Production

A comprehensive look to the universal self-propelled rice transplanters using Analytic Hierarchy Process (A case of developing country)

Optimization of a Solar Light Trap for Controlling the Pest in Rice Field

Influence of the nozzle type, air-assisted velocity, and wind velocity on the measurements of spray drift potential of boom sprayers

Development a cleaner for thresher of sunflower grain and optimization with RSM

IV-Energy in Agriculture

Evaluation of Energy Consumption Pattern in Rice Processing Using Taguchi and Artificial Neural Network Approaches

Physico-Mechanical and Fuel Properties of Sawdust Briquettes using Abelmoschus esculentus Waste as a Binder

V-Management, Ergonomics and Systems Engineering

Explanation of evaluation criteria for rice weeding machine in paddy fields of Iran

VI-Postharvest Technology and Process Engineering

Modeling and Simulation of Efficiency of Cassava Attrition Peeling Machine

Development of a machine vision-based colorimetric system for bell peppers (Capsicum annuum L.) using intelligent modelling techniques

COMPUTATIONAL FLUID DYNAMICS AND PERFORMANCE EVALUATION OF A CHIMNEY SOLAR DRYER FOR CHILLI PEPPER

Silica nanoparticle: a potential new insecticide for beet armyworm, Spodoptera exigua Hubner (Lep.: Noctuidae) control

Comparative Analysis of Mechanical Properties of Two Varieties of Periwinkle Relevant to Its Processing Equipment Design

Design, development and evaluation of a rotary potato sorting machine

DEVELOPMENT OF AN IMPROVED DOUBLE BURNER NATURAL DRAFT BIOMASS COOKSTOVE

Classification of wheat varieties by PLS-DA and LDA models and investigation of the spatial distribution of protein content using NIR spectroscopy

Freshness and quality assessment of parsley using image processing and artificial intelligence techniques

Thermodynamic properties and moisture sorption isotherms of Matricaria pubescens from Algerian Sahara

Influence of moisture content on physico-mechanical and color characteristics of yellow, purple and black wheat (Triticum aestivum) Physical and Mechanical properties of pigmented wheat

Predictive Models for Head Rice Yield and Breakage Ratio Under Optimal Steam Parboiling Variables for Faro 44 Rice Variety

Modeled dryer using an automatic control system for agricultural products

Effect of grain moisture and clearance of machine on mechanical damage of processed paddy

The Antioxidant Properties of Compressed Persimmon Fruit using Putrescine Coatings and Polyamine Films

Developed By

Information