Vol. 25 No. 1 (2023): CIGR Journal

I-Land and Water Engineering

Evaluation of low-head drip systems for vegetable farming in Bangladesh

Nusrat Jahan, Mohammad Monjurul Alam, Mohammad Ayub Hossain, Md. Moinul Hosain Oliver, Muhammad Abdul Mojid, Muhammad Arshadul Hoque, Khokan Kumer Sarker
- 1-7361
Construction and evaluation of solar system for fuzzy control of intelligent irrigation system

Mohammad Younesi Alamooti, hamid khafajeh, Arzhang Javadi, Hossein Dehghanisanij Sanich
- 2-8353

III-Equipment Engineering for Plant Production

Design and development of a vertical plate precision seed metering device with positive seed knockout mechanism

Tejendra Sharma, Dewangan K.N.
- 3-5831
An approach to compensation of dust effects on seed flow sensors

Hosein Navid, Amir Fathipour, Hadi Karimi, Ali Ghaffarnezhad, Ning Wang
- 4-8325
Development of a paddy rice de-husking cum polishing machine

Adeniyi Tajudeen Olayanju, John Olusegun Ojediran, clinton emeka Okonkwo, Syed Zameer Hussain, Adejoke Deborah Adewumi
- 5-7007
DEVELOPMENT AND PERFORMANCE EVALUTION OF PALM KERNEL CRACKING AND SEPARATING MACHINE

IYALABANI KAMARU ALABA
- 6-7199
Design and preliminary evaluation of an onion harvester hand tractor implement

rosalinda abad
- 7-8139
Technological Capability of Local Fabricators in Fabrication of Equipment for Special Palm Oil in Nigeria

Oseni Kehinde Owolarafe, Babatunde Sunday Ogunsina, Sirajudeen Olarewaju OBAYOPO, Tunde Afolabi MORAKINYO, Victor Ogbonnaya OKORIE, Gbonjubola Olufunmilayo BINUYO, Gbonjubola Olufunmilayo BINUYO, Ibrahim Akanni Owolabi, Ganiyu Ademola Badmus, Isaac Olatunde Olaoye
- 8-8321

IV-Energy in Agriculture

Sustainability of Malaysian Smallholder Banana Farming: an Energy Efficiency Use-Based Audit

Darius El Pebrian
- 9-8239

V-Management, Ergonomics and Systems Engineering

VI-Postharvest Technology and Process Engineering

Development of ANN-based sorption isotherm algorithm for the prediction of EMC of the paddy

Sourav Chakraborty, Manuj K Hazarika
- 12-8357
Effect of Gamma Irradiation and Coating with Jojoba Oil on Quality of Strawberry Fruits

Abd El-Rahman Abd El-Raouf Ahmed-PTPE, LWE, EEPP, IT
- 13-6003
Effect of moisture content on the physical properties of mung bean varieties grown in Abakaliki, Ebonyi State, Nigeria

Onyekachi John Ikegwu
- 14-6611
The Response Surface Methodology Approach Successfully Optimizes a Dry Milling Process of Porang (Amorphophallus muelleri Blume) Flour Production that uses Micro Mill- Assisted by Cyclone Separator

Jatmiko Eko Witoyo, Bambang Dwi Argo, Sudarminto Setyo Yuwono, SIMON BAMBANG WIDJANARKO
- 15-6971
Design of a seed extractor using the physical and mechanical properties of cucumber fruits

Ashour Eid Abu-Elmaaty
- 16-7173
Drying kinetics, modeling and quality of quince slices in thin layer air impingement jet dryer

Hadi Goli, Salah Ghamari, Abdolvahed Khanahmadzadeh
- 17-7609
Physical properties measurements of okra fruits using image processing to predict of visual maturity index

Abd El-Rahman Abd El-Raouf Ahmed-PTPE, LWE, EEPP, IT
- 18-8119
Microwave-drying kinetics of lemon (Citrus limon) determining some quality attributes of dried product Microwave-drying kinetics of lemon

Sara E. N. Radwan, Mona M. Hassan, Taghreed H. Ahmed
- 19-8179
Design, development, and performance evaluation of carrot washing and grading machine

Mustefa Jarso, Dr. Amana Wako
- 20-8291

I-Land and Water Engineering

Evaluation of low-head drip systems for vegetable farming in Bangladesh

Construction and evaluation of solar system for fuzzy control of intelligent irrigation system

III-Equipment Engineering for Plant Production

Design and development of a vertical plate precision seed metering device with positive seed knockout mechanism

An approach to compensation of dust effects on seed flow sensors

Development of a paddy rice de-husking cum polishing machine

DEVELOPMENT AND PERFORMANCE EVALUTION OF PALM KERNEL CRACKING AND SEPARATING MACHINE

Design and preliminary evaluation of an onion harvester hand tractor implement

Technological Capability of Local Fabricators in Fabrication of Equipment for Special Palm Oil in Nigeria

IV-Energy in Agriculture

Sustainability of Malaysian Smallholder Banana Farming: an Energy Efficiency Use-Based Audit

V-Management, Ergonomics and Systems Engineering

Actual Productivity of Laborers for Pomegranate Harvesting: Application of Stop Watch Time Study Technique

Validation of simulated dynamic behavior of sprayer boom in SOLIDWORKS through actual field experiments

VI-Postharvest Technology and Process Engineering

Development of ANN-based sorption isotherm algorithm for the prediction of EMC of the paddy

Effect of Gamma Irradiation and Coating with Jojoba Oil on Quality of Strawberry Fruits

Effect of moisture content on the physical properties of mung bean varieties grown in Abakaliki, Ebonyi State, Nigeria

The Response Surface Methodology Approach Successfully Optimizes a Dry Milling Process of Porang (Amorphophallus muelleri Blume) Flour Production that uses Micro Mill- Assisted by Cyclone Separator

Design of a seed extractor using the physical and mechanical properties of cucumber fruits

Drying kinetics, modeling and quality of quince slices in thin layer air impingement jet dryer

Physical properties measurements of okra fruits using image processing to predict of visual maturity index

Microwave-drying kinetics of lemon (Citrus limon) determining some quality attributes of dried product Microwave-drying kinetics of lemon

Design, development, and performance evaluation of carrot washing and grading machine

Developed By

Information