Vol. 24 No. 1 (2022): CIGR Journal

I-Land and Water Engineering

Identification of Best Potential Evapotranspiration model for Estimating Reference Evapotranspiration for sub temperate climate: Almora, Uttarakhand

UTKARSH KUMAR, Suresh Chandra Panday, Jitendra Kumar, Manoj Parihar, Vijay Singh Meena, Jaideep Kumar Bisht, Lakshmi Kant
- 4-7333
Effects of groundnut shells on soil properties, growth and yield of maize

TANKO BAKO, EZEKIEL AMBO MAMAI, AKILA BARDEY ISTIFANUS
- 1-7211
Temporal monitoring of corn (Zea mays L.) yield using grami model, satellite imagery, and climate data in a semi-arid area

Fatemeh Asghari, Mohammad Sharif, Mirmasoud Kheirkhah Zarkesh, Jahangir Porhemmat
- 3-7241
Treated wastewater irrigation of tomato crop: Effects on tomato crop production, and on physico-chemical properties, SDH activity and microbiological properties of tomato fruits

SOUKAINA OUANSAFI
- 2-7223

II-Farm Buildings and Construction

Combination of Black Shading Nets and Its Effect on Radiation Intensity and Quality

Carlos Henrique Goulart dos Reis, Fabricio José Pereira
- 6-7375

III-Equipment Engineering for Plant Production

Adaption of Modified Brush Cutter for Rice Harvesting

JAGVIR DIXIT
- 11-7103
EFFECTS OF SOIL MOISTURE CONTENT AND TYRE INFLATION PRESSURE ON MOTION RESISTANCE OF A SINGLE NARROW WHEELS

ADEWALE MOSES SEDARA
- 9-6379
Air-assisted velocity profiles and perceptive canopy interactions of commercial airblast sprayers used in Pacific Northwest perennial specialty crop production

Lav R Khot
- 10-7039
Analysis of nozzle spray distribution for different nozzle height and pressure

Farhad Khoshnam
- 8-6345

IV-Energy in Agriculture

Life cycle assessment of a portable assembly biogas unit used for treating food, kitchen and landscape wastes

Mohamed Samer
- 15-7047
Analysis of changes in energy use pattern of wheat crop in two decades – A study of central India

Atul kumar Shrivastava, prabhat kumar guru, N K Khandelwal, R K Dubey
- 14-6999
Tillage and irrigation methods effects on energy use and greenhouse gas emissions in grain corn production

Sadegh Afzalinia
- 12-6909
Development and performance evaluation of a piston type hydraulically operated briquetting machine with replaceable moulds

Opeyemi Ayodeji Akogun, Mufutau Adekojo Waheed
- 13-6997

V-Management, Ergonomics and Systems Engineering

Ergonomic intervention and Optimization for maximum permissible loads to be carried in Sherpa mode based on physiological criteria

Thaneswer Patel
- 17-7087
A case-study approach to profitability assessment in fermented African locust beans (iru) production using break-even analysis

Jelili Olaniyi Atoyebi, Sururah Apinke Bello, Oseni Kehinde Owolarafe
- 16-6721

VI-Postharvest Technology and Process Engineering

Utilization of a nutrient film technique on strawberry productivity

heba sabry abdelrhman
- 19-7073
Modeling of drying thin layer of tomato slices using solar and convective driers

Réda Khama, F Aissani-Benissad, R Alkama, L Fraikin, A Léonard
- 30-7407
Feed forward neural network and its reverse mapping aspects for the simulation of ginger drying kinetics

Arun Kumar Choudhary, Sourav Chakraborty, Sonam Kumari, Manuj K Hazarika
- 29-7373
THE EFFECT OF CHLORELLA VULGARIS MICROALGAE ON SOME CHARECTERISTICS OF STORAGE TIME OF DATE FRUIT (phoenix dactylifera)

Ali Hashemi, Abdoalali Hesami, Abdoalhosein Ghasemi
- 26-7285
Design and development of rotary disc type garlic clove peeling machine

Satya Narayan Singh
- 24-7231
Effect of different desiccant bed designs in a desiccant column on their dehumidification performance

Prueksa Sawardsuk, Jiraporn Sripinyowanich Jongyingcharoen, Ekkapong Cheevitsopon
- 22-7155
Finite modelling of growth and yield of okra using different tillage systems in Obubra, Nigeria

Simon Ogbeche Odey
- 18-7067
Physicochemical and thermal properties honey samples from Enugu North senatorial zone, Nigeria: Effects of floral locations

Felix Uzochukwu Asoiro, Meshack Imologie Simeon, Chinenye Eberechukwu Azuka
- 28-7343
Surface Color Characteristic of Wheat Grains as Affected by Different Fertilization Rates

Feizollah Shahbazi, Ameneh Nematollahi
- 27-7331
Nondestructive quality assessment of longans using near infrared hyperspectral imaging

WORANITTA SAHACHAIRUNGRUENG, SONTISUK TEERACHAICHAYUT
- 23-7203

I-Land and Water Engineering

Identification of Best Potential Evapotranspiration model for Estimating Reference Evapotranspiration for sub temperate climate: Almora, Uttarakhand

Effects of groundnut shells on soil properties, growth and yield of maize

Temporal monitoring of corn (Zea mays L.) yield using grami model, satellite imagery, and climate data in a semi-arid area

Treated wastewater irrigation of tomato crop: Effects on tomato crop production, and on physico-chemical properties, SDH activity and microbiological properties of tomato fruits

II-Farm Buildings and Construction

Combination of Black Shading Nets and Its Effect on Radiation Intensity and Quality

III-Equipment Engineering for Plant Production

Adaption of Modified Brush Cutter for Rice Harvesting

EFFECTS OF SOIL MOISTURE CONTENT AND TYRE INFLATION PRESSURE ON MOTION RESISTANCE OF A SINGLE NARROW WHEELS

Air-assisted velocity profiles and perceptive canopy interactions of commercial airblast sprayers used in Pacific Northwest perennial specialty crop production

Analysis of nozzle spray distribution for different nozzle height and pressure

IV-Energy in Agriculture

Life cycle assessment of a portable assembly biogas unit used for treating food, kitchen and landscape wastes

Analysis of changes in energy use pattern of wheat crop in two decades – A study of central India

Tillage and irrigation methods effects on energy use and greenhouse gas emissions in grain corn production

Development and performance evaluation of a piston type hydraulically operated briquetting machine with replaceable moulds

V-Management, Ergonomics and Systems Engineering

Ergonomic intervention and Optimization for maximum permissible loads to be carried in Sherpa mode based on physiological criteria

A case-study approach to profitability assessment in fermented African locust beans (iru) production using break-even analysis

VI-Postharvest Technology and Process Engineering

Utilization of a nutrient film technique on strawberry productivity

Modeling of drying thin layer of tomato slices using solar and convective driers

Feed forward neural network and its reverse mapping aspects for the simulation of ginger drying kinetics

THE EFFECT OF CHLORELLA VULGARIS MICROALGAE ON SOME CHARECTERISTICS OF STORAGE TIME OF DATE FRUIT (phoenix dactylifera)

Design and development of rotary disc type garlic clove peeling machine

Effect of different desiccant bed designs in a desiccant column on their dehumidification performance

Finite modelling of growth and yield of okra using different tillage systems in Obubra, Nigeria

Physicochemical and thermal properties honey samples from Enugu North senatorial zone, Nigeria: Effects of floral locations

Surface Color Characteristic of Wheat Grains as Affected by Different Fertilization Rates

Nondestructive quality assessment of longans using near infrared hyperspectral imaging

Developed By

Information