Vol. 23 No. 3 (2021): CIGR Journal

I-Land and Water Engineering

Peak discharge estimation to evaluate and monitor the Gumbasa Watershed performance, Central Sulawesi, Indonesia

Naharuddin Naharuddin Naharuddin, Seyed Mohammad Moein Sadeghi, Adam Malik, Abdul Rosyid, Ahyauddin Ahyauddin
- 4-6723
Estimation of infiltration rate of a paddy growing area in a micro watershed of Sikkim, India

G T Patle
- 2-6659
Water use efficiency of Coix lacryma-jobi L. varieties in response to water supply according to CROPWAT analysis

Fiky Yulianto Wicaksono, Kadapi Muhamad, Tati Nurmala
- 9-6943
Effect of Organic Materials on Soil Physio-Chemical Properties at Bayero University, Kano-Nigeria

ABUBAKAR SABO AHMAD
- 7-6893
Validation of Universal Soil loss Equation for Selected Soil Locations in North Central Nigeria Using Rainfall Simulator

Ibrahim Abayomi Kuti
- 3-6719
Status and sustainability challenges of agricultural water usage in Bangladesh

M. G. Mostofa Amin
- 10-6973
Evaluation of Valiantzas ET0 Equations against FAO56-PM Model in Indian Semi-arid Climatic Conditions

ARVIND SINGH TOMAR
- 1-6651
Production and evaluation of compost tea for cultivation of Amaranthus hybridus

TANKO BAKO, EZEKIEL AMBO MAMAI, AKILA BARDEY ISTIFANUS
- 8-6941
Potential of low-cost subsurface irrigation system in boosting food production in high water scarcity regions

Amir E. Babiker, Maria, H. Elnasikh, Mohamed A. M. Abd Elbasit, Atif I. Abuali, Majed M. Abu-Zerig, Gang Liu
- 6-6813

II-Farm Buildings and Construction

TEMPERATURE-HUMIDITY INDEX AND THERMAL COMFORT OF BROILERS IN HUMID TROPICS.

Oluwafemi Owodunni Omomowo
- 11-6425

III-Equipment Engineering for Plant Production

Design and development of a sensor-based precision crop protection autonomous system for orchard sprayer

Rasool Khodabakhshian, Seyed Morteza Javadpour
- 13-6733
Development and evaluation of four-wheel tractor-attached multi-crop planter for mechanized seeding of maize in the Philippines

KRISTINE Samoy PASCUAL, Marvelin L Rafael, Alaissa T Remocal, Manuel Jose C Regalado
- 15-6811
Development and evaluation of a mechanical carrot washing machine

Mohammad Nurul Amin
- 12-6269
Design and Preliminary Evaluation of a Snail Shelling Machine

Ayoola Abiola Babalola, David Adekunle O, Opafola Bolaji O, Alex Folami Adisa, Olufunmi I Solana, Mayokun David Otele
- 14-6783

IV-Energy in Agriculture

Determination and Evaluation of the energy consumption of grape production in Eyvan county (Ilam province)

Faraidon Kamari, Bahram Ghamary, Amir Azizpanah
- 18-6573
Investigation the effect of outlet air flow and chamber temperature on some bio-char properties of wheat straw in a fixed-bed oxidative pyrolysis

Milad Eghbali, Esmaeil Mirzaee - Ghaleh, Ali Nejat Lorestani, Hekmat Rabbani, Mahmud Khoramivafa
- 17-6419
Applying of DEA approach to optimize the energy required and GHG emission for greenhouse vegetable production in Algeria

Ahmed NOURANI, Abdelaali BENCHEIKH
- 16-6629

V-Management, Ergonomics and Systems Engineering

Ergonomic evaluation of battery operated knapsack sprayer

Shubham Zilpilwar, RAJVIR YADAV, Ketan Sakariya, Manisha Gahane
- 19-5979

VI-Postharvest Technology and Process Engineering

Effect of priming with proline on the performance of two wheat cultivars

Mona Gergis Dawood
- 22-6281
Design, Construction and Performance Evaluation of a Honey Extracting Machine

Friday Nwankwo ARCHIBONG
- 29-6713
Effect of thin layer drying on quality parameters of betel leaf (Piper betle L.)

Amit Meena, Proshanta Guha, Sujosh Nandi
- 31-5668
Development of a Multipurpose Small Scale Dryer for Agricultural Products

Oseni Kehinde Owolarafe, Taiwo Kolade Bello, Babatunde Sunday Ogunsina, Olumide Babatope Falana, Babatunde Olusola Adetifa, Obafemi Ogunseeyin
- 27-6687
Geometry dependence of heating in a U-tube heat exchanger for pasteurization

Jerry James Murillo de la Torre, Alvin B Culaba, Romualdo C Martinez
- 25-6635
Growth bioestimulant: evaluation of coconut under different doses of crop-set

Elisio Sampaio Silva, Gilberto de Castro Mendonça Lima, José de Jesus Pinto, ADEMIR SILVA MENEZES, Luís Gonzaga Pinheiro Neto, Francisco José Carvalho Moreira
- 24-6617
DEVELOPMENT OF A MOTORIZED CASSAVA PEELER FOR SMALL AND MEDIUM SCALE ENTERPRISES

Ishmael Nartey Amanor, Emmanuel Yaovi Hunnuor Bobobee
- 20-6775
Comparison of sanitizing disinfectants on the physicochemical and microbial properties of onion puree (OP)

Elham Azarpazhooh, Parvin Sharayei
- 30-6729
Moisture dependent physical properties of wild safflower (carthamus oxyacanthus) seeds

Abdolvahed khanahmadzadeh, Hadi Goli, Salah Ghamari
- 21-5977
Evaluation of Mechanical Z-Type Elevator Operation for Handling Seed Corn

Hamid Reza Gazor, Omid Reza Roustapour
- 28-6689
EFFECT OF EXTRACTION METHODS ON YIELD AND QUALITY CHARACTERISTICS OF COCONUT (Cocos nucifera L) OIL

Clement Adesoji Ogunlade, John A. V. Famurewa, Kehinde F. Jaiyeoba
- 26-6679
Development of weight grader for dehusked coconut

A.Asha Monicka, T Pandiarajan, A. Brusly Solomon, S Ganapathy
- 23-6591

I-Land and Water Engineering

Peak discharge estimation to evaluate and monitor the Gumbasa Watershed performance, Central Sulawesi, Indonesia

Estimation of infiltration rate of a paddy growing area in a micro watershed of Sikkim, India

Water use efficiency of Coix lacryma-jobi L. varieties in response to water supply according to CROPWAT analysis

Effect of Organic Materials on Soil Physio-Chemical Properties at Bayero University, Kano-Nigeria

Validation of Universal Soil loss Equation for Selected Soil Locations in North Central Nigeria Using Rainfall Simulator

Status and sustainability challenges of agricultural water usage in Bangladesh

Evaluation of Valiantzas ET0 Equations against FAO56-PM Model in Indian Semi-arid Climatic Conditions

Production and evaluation of compost tea for cultivation of Amaranthus hybridus

Potential of low-cost subsurface irrigation system in boosting food production in high water scarcity regions

II-Farm Buildings and Construction

TEMPERATURE-HUMIDITY INDEX AND THERMAL COMFORT OF BROILERS IN HUMID TROPICS.

III-Equipment Engineering for Plant Production

Design and development of a sensor-based precision crop protection autonomous system for orchard sprayer

Development and evaluation of four-wheel tractor-attached multi-crop planter for mechanized seeding of maize in the Philippines

Development and evaluation of a mechanical carrot washing machine

Design and Preliminary Evaluation of a Snail Shelling Machine

IV-Energy in Agriculture

Determination and Evaluation of the energy consumption of grape production in Eyvan county (Ilam province)

Investigation the effect of outlet air flow and chamber temperature on some bio-char properties of wheat straw in a fixed-bed oxidative pyrolysis

Applying of DEA approach to optimize the energy required and GHG emission for greenhouse vegetable production in Algeria

V-Management, Ergonomics and Systems Engineering

Ergonomic evaluation of battery operated knapsack sprayer

VI-Postharvest Technology and Process Engineering

Effect of priming with proline on the performance of two wheat cultivars

Design, Construction and Performance Evaluation of a Honey Extracting Machine

Effect of thin layer drying on quality parameters of betel leaf (Piper betle L.)

Development of a Multipurpose Small Scale Dryer for Agricultural Products

Geometry dependence of heating in a U-tube heat exchanger for pasteurization

Growth bioestimulant: evaluation of coconut under different doses of crop-set

DEVELOPMENT OF A MOTORIZED CASSAVA PEELER FOR SMALL AND MEDIUM SCALE ENTERPRISES

Comparison of sanitizing disinfectants on the physicochemical and microbial properties of onion puree (OP)

Moisture dependent physical properties of wild safflower (carthamus oxyacanthus) seeds

Evaluation of Mechanical Z-Type Elevator Operation for Handling Seed Corn

EFFECT OF EXTRACTION METHODS ON YIELD AND QUALITY CHARACTERISTICS OF COCONUT (Cocos nucifera L) OIL

Development of weight grader for dehusked coconut

Developed By

Information