, India
-
Agricultural Engineering International: CIGR Journal Vol. 24 No. 2 (2022): CIGR Journal - VI-Postharvest Technology and Process Engineering
Influence of moisture content on physico-mechanical and color characteristics of yellow, purple and black wheat (Triticum aestivum)
Abstract 23-7615 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 2 (2023): CIGR Journal - VII-Information Systems
Fruit Shop Tool: Fruit Classification and Recognition using Deep Learning
Abstract 25-7847 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 4 (2022): CIGR Journal - VI-Postharvest Technology and Process Engineering
Comparison of physiochemical properties and colour of wheat flour
Abstract 13-7959 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 2 (2023): CIGR Journal - VI-Postharvest Technology and Process Engineering
UNDERSTANDING CLARIFICATION OF SWEET ORANGE JUICE BY MICROFILTRATION AND FOULING BEHAVIOUR
Abstract 17-8333 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 1 (2023): CIGR Journal - VI-Postharvest Technology and Process Engineering
Development of ANN-based sorption isotherm algorithm for the prediction of EMC of the paddy
Abstract 12-8357 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 3 (2023): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Anthropometric data analysis and constraints faced by women in operating agricultural machinery
Abstract 15-8549 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 3 (2023): CIGR Journal - III-Equipment Engineering for Plant Production
Optimization of Operational Parameters for Tractor Operated Swinging Lance Sprayer using Taguchi Design
Abstract 10-8597 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 4 (2023): CIGR Journal - III-Equipment Engineering for Plant Production
An ATTACHMENT FOR MONITORING OF TRACTOR REAR MOUNTED IMPLEMENTS
Abstract 8-8753 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 4 (2023): CIGR Journal - VI-Postharvest Technology and Process Engineering
Changes in Sensorial and Microstructural Characteristic of Puffed Brown Rice with change in Preconditioning in Hot Sand Bed Puffing
Abstract 22-8761 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 4 (2023): CIGR Journal - VI-Postharvest Technology and Process Engineering
A review Technological development in the grading of fruits and vegetables
Abstract 24-8841 -
Agricultural Engineering International: CIGR Journal Volume XI (2009) - I-Land and Water Engineering
Effect of Puddling on Puddled Soil Characteristics and Performance of Self-propelled Transplanter in Rice Crop
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 13 No. 1 (2011): CIGR Journal - IV-Energy in Agriculture
Development and Evaluation of Multi Reflector Foldable Type Solar Cooker
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 13 No. 3 (2011): CIGR Journal - III-Equipment Engineering for Plant Production
Sprayer Performance in Relation to Air-Assistance
Abstract -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - IV-Energy in Agriculture
Power productivity enhancement using performance analysis of biomass gasifier at energy park, RGTU Bhopal (MP, India)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume X (2008) - III-Equipment Engineering for Plant Production
Development and Ergonomic Evaluation of Manually Operated Weeder for Dry Land Crops
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume XI (2009) - VI-Postharvest Technology and Process Engineering
Development of a Household Coconut Punch-cum-Splitter
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume X (2008) - IV-Energy in Agriculture
Performance Study of Diesel Engine by using Mahua Methyl Ester (biodiesel) and its Blends with Diesel Fuel
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume X (2008) - III-Equipment Engineering for Plant Production
Analysis of Selected Tractor Seats for Seating Dimensions in Laboratory
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume X (2008) - III-Equipment Engineering for Plant Production
A Computer Model to Select Optimum Size of Farm Power and Machinery for Paddy-Wheat Crop Rotation in Northern India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 13 No. 2 (2011): CIGR Journal - III-Equipment Engineering for Plant Production
Modification and performance evaluation of tractor drawn improved till plant machine under vertisol
Abstract Provisional PDF Untitled () PDF -
Agricultural Engineering International: CIGR Journal Volume XI (2009) - IV-Energy in Agriculture
A Review of Strategies for Sustainable Bio Diesel Feed Stock Generation In India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume XI (2009) - IV-Energy in Agriculture
Effect of Injection Pressure on Performance, Emission and Combustion Characteristics of Direct Injection Diesel Engine Running on Blends of Pongamia Pinnata Linn (Honge oil) Oil and Diesel Fuel
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 12 No. 1 (2010): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Isometric push/pull strength of agricultural workers of Central India
Abstract Provisional-PDF PDF -
Agricultural Engineering International: CIGR Journal Volume XI (2009) - III-Equipment Engineering for Plant Production
Design and Development of Demand Feeder for Carp Feeding in Outdoor Culture System
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume XI (2009) - VI-Postharvest Technology and Process Engineering
Protein Fortification of Mango and Banana Bar using Roasted Bengal Gram Flour and Skim Milk Powder
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 12 No. 1 (2010): CIGR Journal - III-Equipment Engineering for Plant Production
Design and development of subsoiler-cum-differential rate fertilizer applicator
Abstract Provisional-PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 12 No. 1 (2010): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Anthropometric considerations of farm tools/machinery design for tribal workers of northeastern India
Abstract Provisional-PDF PDF -
Agricultural Engineering International: CIGR Journal Volume XI (2009) - VI-Postharvest Technology and Process Engineering
Studies on Machine-Crop Parameters for Chickpea Seed Crop Threshing
Abstract PDF -
Agricultural Engineering International: CIGR Journal Volume X (2008) - VI-Postharvest Technology and Process Engineering
Effect of processing methods on qualities of instant whole legume: Pigeon pea (Cajanus cajan L.)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 12 No. 1 (2010): CIGR Journal - VI-Postharvest Technology and Process Engineering
Development of large scale drying system for Chillies(Capsicum annum)
Abstract Provisional-PDF PDF -
Agricultural Engineering International: CIGR Journal Volume X (2008) - VI-Postharvest Technology and Process Engineering
Effect of processing methods on qualities of instant whole legume: Pigeon pea (Cajanus cajan L.)
Abstract PDF () -
Agricultural Engineering International: CIGR Journal Vol. 12 No. 2 (2010): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Analytical study of strength parameters of Indian farm workers and its implication in equipment design
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 1 (2012): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Physiological workload of farm women while evaluating sickles for paddy harvesting
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 12 No. 1 (2010): CIGR Journal - III-Equipment Engineering for Plant Production
Influence of coolant temperature on the performance of a four stroke spark ignition engine employing a dual circuit cooling system
Abstract Provisional-PDF(1) Provisional-PDF(2) PDF -
Agricultural Engineering International: CIGR Journal Vol. 13 No. 3 (2011): CIGR Journal - IV-Energy in Agriculture
Comparative study of Hemp and Jatropha oil blends used as an alternative fuel in diesel engine
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 2 (2014): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Modeling of wheat crop harvesting losses
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 12 No. 3-4 (2010): CIGR Journal - VI-Postharvest Technology and Process Engineering
Microwave density – independent permittivity functions as soybean seeds’ moisture calibrators: A new approach
Abstract Provisional-PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 13 No. 1 (2011): CIGR Journal - VI-Postharvest Technology and Process Engineering
Neural Network Approaches for Prediction of Drying Kinetics During Drying of Sweet Potato
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 13 No. 3 (2011): CIGR Journal - II-Farm Buildings and Construction
Engineering Properties of Laterite Stone Scrap Blocks
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 2 (2012): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Isometric torque affected by its position and posture
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - I-Land and Water Engineering
Modeling for predicting soil wetting radius under point source surface trickle irrigation
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 3 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Post harvest crop processing machine
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 3 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Osmotic dehydration of litchi pulp as a pretreatment for drying processes
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 3 (2012): CIGR Journal - VII-Information Systems
Identification of the best treatment combination for seedling production through fuzzy logic model and Pareto dominance criterion
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 1 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Drying kinetics of osmotically pretreated carrot shreds to be used for preparation of sweet meat
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 2 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
A pneumatic assisted electronically controlled continuous aonla seed removing machine
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - IV-Energy in Agriculture
Performance characteristics of Jatropha ethyl ester as diesel engine fuel at different compression ratios
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 2 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Modeling for the Modified Atmosphere Packaging of Sapota Fruit
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 4 (2012): CIGR Journal - IV-Energy in Agriculture
Study on Forced Convection type Solar Tunnel Dryer for Industrial Applications
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 2 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Design and development of small scale pea depoding machine by using CAD software
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 4 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Physical properties of large cardamom cultivated in north eastern Himalayan region of Sikkim, India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 2 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of temperature, relative humidity and moisture content on germination percentage of wheat stored in different storage structures
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 4 (2012): CIGR Journal - IV-Energy in Agriculture
Fabrication of Light Weight Farms Yoke With The Use of Composite Material
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 2 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Determination of physical properties of soybean at different moisture levels
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 4 (2012): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Anthropometric and Strength Data of Indian Agricultural Workers for Equipment Design: A Review
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Effect of thresher drive linkage design on human physiological workload of a pedal operated thresher
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 4 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Convective dehydration kinetics of noodles prepared from taro (Colocasia esculenta), rice (Oryza sativa) and pigeonpea (Cajanus cajan) flours
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 3 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Formulation of experimental data based model for oil press using human powered flywheel motor as energy source
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 3 (2012): CIGR Journal - IV-Energy in Agriculture
Life cycle assessment of biodiesel production from pongamia oil in rural Karnataka
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 4 (2014): CIGR Journal - IV-Energy in Agriculture
Ancient and Present Trends in Solar Drying Systems
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 4 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Some cooking properties of germinated brown rice
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 4 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Development and evaluation of RTE (Ready To Eat) extruded snack using egg albumin powder and cheese powder
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - V-Management, Ergonomics and Systems Engineering
vibration characteristics of mini tractor (8.7 kW) on tar macadam
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 4 (2012): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Study of farm machinery services provided by selected Cooperative Societies
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Preparation of guava jam blended with sapota
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Physical and sensory characteristics of Ready-To-Eat food prepared from finger millet based composite mixer by extrusion
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of soaking and malting on finger millet (EleusineCoracana) grain
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - I-Land and Water Engineering
Prioritization of watersheds using multi-criteria evaluation through fuzzy analytical hierarchy process
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Patchouli in fragrances-incense stick production from patchouli spent charge powder
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
An Introduction to Patchouli (Pogostemon cablin Benth.) – A Medicinal and Aromatic Plant: It’s Importance to Mankind
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Drying studies of patchouli spent charge – in special reference to its use in incense sticks production
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Physical properties of bottle gourd seeds
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 1 (2013): CIGR Journal - VII-Information Systems
Detection of unhealthy region of plant leaves and classification of plant leaf diseases using texture features
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - III-Equipment Engineering for Plant Production
Study of tractive efficiency as an effect of ballast and tire inflation pressure in sandy loam soil
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Study on the effect of machine operative parameters on physical characteristics of rice/maize based fruit/vegetable pulp fortified extrudates
Abstract PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Ergonomical evaluation of hand operated maize dehusker-sheller with farm women
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - IV-Energy in Agriculture
Energy input–output analysis and mechanization status for cultivation of rice and maize crops in Sikkim
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - I-Land and Water Engineering
Evaluation of hydraulics characteristics and management strategies of subsurface drainage system in Indira Gandhi Canal Command
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - III-Equipment Engineering for Plant Production
Estimation of plant nitrogen content using digital image processing
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 2 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of hydrocolloids on cooking quality, protein and starch digestibility of ready-to-cook gluten free extruded product
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - I-Land and Water Engineering
Growth, yield and nutrient uptake of guava (Psidium Guavaja L.) affected by soil matric potential, fertigation and mulching under drip irrigation
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 1 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Estimation of drying rate constant from static bed moisture profile by neural network inversion
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 2 (2013): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Reduction of hand transmitted and whole body vibrations experienced by tractor operators by using piezo crystal material
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 4 (2013): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Translational vibration evaluation of tractor seats for ride comfort
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Grader: A review of different methods of grading for fruits and vegetables
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 4 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Quality of dried carrot pomace powder as affected by pretreatments and methods of drying
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 3 (2013): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Evaluation of yield monitoring system installed on indigenous grain combine harvester for rice crop
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 4 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Studies on Refrigerated Storage of Minimally Processed Papaya (Carica papaya L.)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 4 (2013): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of temperature on viscosity of kokum, karonda, mango pulp and cashew apple syrup
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - VII-Information Systems
ECALTOOL: fuzzy logic based computer program to calibrate the Hargreaves equation for accurate estimation of evapotranspiration
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 1 (2014): CIGR Journal - IV-Energy in Agriculture
Experimental study on the performance of microwave assisted Hydrogen peroxide (H2O2) pretreatment of rice straw
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 15 No. 4 (2013): CIGR Journal - III-Equipment Engineering for Plant Production
Development and evaluation of nitrogen (liquid Urea) applicator for straw mulched no-till wheat
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 1 (2014): CIGR Journal - I-Land and Water Engineering
Hydraulic impact of Wan River Project with MIKE 11
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 1 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
Performance evaluation of a manually operated paddy drum seeder - a cost saving technology for paddy cultivation
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 1 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
Performance evaluation of rice bran biodiesel in small size agricultural diesel engines
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of moisture content on physio-mechanical properties of coriander seeds (Coriandrum sativum)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 2 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Processing and storage stability of bottle gourd (L. siceraria)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 2 (2014): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Anthropometric survey of farm workers of Ladakh region of India and its application in equipment design
Abstract PDF () PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 1 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
Moisture Dependent Physical Properties of Black gram
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Enzymatic clarification of carrot juice by using response surface methodology
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 4 (2014): CIGR Journal - IV-Energy in Agriculture
Global Biomethanation Potential from Food Waste- A Review
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 2 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Modeling of thin layer drying kinetics of grape juice concentrate and quality assessment of developed grape leather
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 2 (2014): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Isometric muscular strength data of Indian agricultural workers for equipment design: Critical analysis
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Air drying kinetics and quality characteristics of oyster mushroom (Pleurotus ostreatus) influenced by osmotic dehydration
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
Studies on Effect of Electrostatic Spraying in Orchards
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 2 (2015): CIGR Journal - IV-Energy in Agriculture
Experimental evaluation of substrate’s particle size of wheat and rice straw biomass on methane production yield
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 4 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
Analysis of straw bruising and sieving system on performance of modified wheat straw combine for better straw quality
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 4 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Formulation and optimization of foam mat dried grape bar
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Comparative study on phase changing material for refrigeration effect for milk chilling
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Assessment of fruits during shelf-life storage using biospeckle laser
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of microwave power on foam-mat drying of tomato pulp
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
Physical properties of soybean cultivated in NEH region of India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 4 (2014): CIGR Journal - VII-Information Systems
Neuro-kNN classification system for detecting fungal disease found on vegetable crops using local binary patterns
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 2 (2015): CIGR Journal - III-Equipment Engineering for Plant Production
Development of a tractor operated planter for direct sowing of onion crop
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 1 (2015): CIGR Journal - III-Equipment Engineering for Plant Production
Determination of Force Acting on the Rice Transplanter Finger
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 3 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
Present status, potential and future needs for mechanization of agricultural operations in Jammu and Kashmir state of India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 2 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effects of blanching on the dehydration characteristics of unripe banana slices dried at different temperature
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 4 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
An electromechanical implement lift system with position control for low horse power tractor
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 1 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
Performance evaluation of screw-press oil expeller using a continuous spiral and decreasing length of pitch of screw
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 1 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
EFFECT OF DIFFERENT STORAGE ENVIRONMENT ON QUALITY CHARACTERISTICS OF TOMATO AND KINNOW FRUITS
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 3 (2015): CIGR Journal - IV-Energy in Agriculture
Performance Evaluation of a Hand pump with Provision of a Sealed Secondary Water Sump
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 3 (2015): CIGR Journal - I-Land and Water Engineering
Development and comparative evaluation of radiation-based reference evapotranspiration equations for sub-humid Hazaribagh region of Jharkhand
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 2 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
TAMARIND SEED PROCESSING AND BY-PRODUCTS
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 3 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
Pasting Characteristics of Stored Wheat in Hermetic Bags and Conventional Methods
Abstract PDF Untitled () -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 4 (2016): CIGR Journal - I-Land and Water Engineering
Determination of surface drainage coefficient - a case study of Doimukh (Arunachal Pradesh), India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 2 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of process parameters on the antioxidant activities of bioactive compounds from Harad (Terminalia chebula retz.) Shilpa Soni, H.K. Sharma*, Pragati Kaushal and C. Singh Food Engineering & Technology Department, Sant Longowal Institute of Engineeri
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 4 (2015): CIGR Journal - I-Land and Water Engineering
Modeling optimal irrigation scheduling under conjunctive use of canal water and poor quality groundwater in semi-arid region of northwestern India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 4 (2015): CIGR Journal - III-Equipment Engineering for Plant Production
Ergonomic evaluation of electric hedge trimmer using digital human modeling
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 2 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Assessment of biospeckle activity of lemon fruit
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 3 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
Present status of peanuts and progression in its processing and preservation techniques
Abstract PDF Untitled () -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 3 (2015): CIGR Journal - III-Equipment Engineering for Plant Production
Attribute Based Coding, Review and Gap Analysis of Cotton Harvesting Processes and Machines
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 2 (2016): CIGR Journal - I-Land and Water Engineering
Plant height based evapotranspiration model for eucalyptus
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 3 (2015): CIGR Journal - IV-Energy in Agriculture
Farm power availability for sustainable agriculture development in Punjab state of India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 3 (2015): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Generation of database for development of a control system for precision seed applicator
Abstract PDF Untitled () -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 1 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Moisture dependent thermal properties of ground flaxseed (Linum usitatissimum)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 4 (2015): CIGR Journal - VI-Postharvest Technology and Process Engineering
Classification of Banana Fruit Maturity using zNose
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 4 (2015): CIGR Journal - III-Equipment Engineering for Plant Production
Design and selection of agricultural machinery using a quality function deployment technique
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 4 (2015): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Physiological evaluation of manual operated weeders and sprayers on farm use
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 1 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Computational fluid dynamics (CFD) modeling of grain-water suspensions in tube
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 4 (2015): CIGR Journal - III-Equipment Engineering for Plant Production
Present status, scope and future needs for mechanization of apple cultivation in mountains of Himachal Pradesh, India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 3 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of moisture content on engineering properties of oats (Avena sativa L.)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 1 (2016): CIGR Journal - VII-Information Systems
An edge texture features based methodology for bulk paddy variety recognition
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 1 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Thin layer and deep bed drying basic theories and modelling: a review
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 4 (2015): CIGR Journal - III-Equipment Engineering for Plant Production
Operator physiological response and bullock draughtability during primary tillage
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 2 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
A review on applications of greenhouse drying and its performance
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 1 (2017): CIGR Journal - III-Equipment Engineering for Plant Production
Effect of spade angle and spading frequency of spading machine on specific soil resistance and pulverization
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 2 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Assessment of mass exchange during osmotic dehydration of dragon fruit
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 2 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Optimization of microwave assisted mechanical extraction of oil from canola seeds by using Response Surface Methodology
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 4 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Comparative study between ANN and master curve technique for the thin layer drying kinetic study of paddy and modeling of its critical drying temperature by using ANN-PSO approach
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 1 (2017): CIGR Journal - III-Equipment Engineering for Plant Production
Development and performance evaluation of manual/bullock operated multicrop planter for hilly region
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 2 (2017): CIGR Journal - VI-Postharvest Technology and Process Engineering
Optimisation of Process Parameters for Vacuum Concentration and Foaming Behaviour of Aloe vera (Aloe barbadensis Miller) Gel
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 2 (2017): CIGR Journal - III-Equipment Engineering for Plant Production
An Agriculture Robot (AGRIBOT) for Harvesting Underground Plants (RHIZOMES)
Abstract PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 4 (2016): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Physiological and perceptual responses during Sherpa mode of load carriage: Role of hip and shoulder belt supports
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 1 (2017): CIGR Journal - VII-Information Systems
Fuzzy logic approach in prioritization of crop growing parameters in protected farms: a case in North East India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 3 (2016): CIGR Journal - III-Equipment Engineering for Plant Production
Performance of lugged cage wheel for wetland cultivation
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 1 (2017): CIGR Journal - VI-Postharvest Technology and Process Engineering
A comparative study on drying of basil leaves
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 18 No. 4 (2016): CIGR Journal - VI-Postharvest Technology and Process Engineering
Optimization of extraction of deoiled rice bran protein and its utilization in wheat based cookies
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 1 (2017): CIGR Journal - VI-Postharvest Technology and Process Engineering
Non-newtonian flow modelling based design of plate heat exchangers
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 1 (2020): CIGR Journal - VI-Postharvest Technology and Process Engineering
Influence of Shape, Pre-treatment and Drying Air Temperatureon Quality of Dried Aonla
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 1 (2018): CIGR Journal - III-Equipment Engineering for Plant Production
Performance evaluation of furrow openers for sugarcane planting in sub-tropical India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 4 (2017): CIGR Journal - VI-Postharvest Technology and Process Engineering
Soaking Effects on Physical Characteristics of Basmati (Pusa Basmati 1121) Rice
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 2 (2017): CIGR Journal - IV-Energy in Agriculture
Performance evaluation of PV ventilated hybrid greenhouse dryer under no load condition
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 4 (2017): CIGR Journal - VI-Postharvest Technology and Process Engineering
Refractance Window and Conduction Dryings of Mango Pulp
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 3 (2017): CIGR Journal - III-Equipment Engineering for Plant Production
Computer-aided engineering (CAE) approach to design a cultivator for small farm holdings in the West Bengal state of India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 19 No. 4 (2017): CIGR Journal - VI-Postharvest Technology and Process Engineering
Development of empirical expression for thin layer groundnut drying under open sun and forced convection modes
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 2 (2020): CIGR Journal - VI-Postharvest Technology and Process Engineering
Economic analysis in mechanized production of Khoa
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 1 (2018): CIGR Journal - I-Land and Water Engineering
Modelling Nonlinear Daily Evapotranspiration using Variable Infiltration Capacity Model and Artificial Neural Network
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 2 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Mathematical modeling of drying kinetic of Bhimkol (Musa balbisiana) Pulp by applying master curve technique and general code developed in MATLAB
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 3 (2018): CIGR Journal - III-Equipment Engineering for Plant Production
Wear on circular orifice plate of hollow-cone type agrochemical spray nozzles
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 3 (2019): CIGR Journal - VI-Postharvest Technology and Process Engineering
Water Uptake in Brown Rice during Soaking for Production of No-cooking Rice
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 1 (2018): CIGR Journal - Invited Overview Articles
Evaporative cooling technologies for greenhouses: a comprehensive review
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 2 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Induction Heating Assisted Foam Mat Drying of Papaya Pulp: Drying Kinetics, drying modeling, and Effects on Quality Attributes
Abstract Untitled PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 2 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Dhal Recovery From Enzyme Pretreated Pigeon Pea Cultivar Gjp1
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 3 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Drying behaviour and engineering properties of Lima beans
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 3 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Studies on low temperature grinding of turmeric
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 3 (2018): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Mathematical model for design of gender friendly farm equipment
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 4 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Experimental analyses of drying characteristics of selected food samples
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 4 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Scientific and Technological Aspects of Tea Drying and Withering: A Review
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 3 (2019): CIGR Journal - VI-Postharvest Technology and Process Engineering
AN INTELLIGENT COMPUTER VISION SYSTEM FOR VEGETABLES AND FRUITS QUALITY INSPECTION USING SOFT COMPUTING TECHNIQUES
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 2 (2019): CIGR Journal - I-Land and Water Engineering
Economic of cubical and semi-spherical shape stacked protected farms for marginal farmers
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 1 (2019): CIGR Journal - VI-Postharvest Technology and Process Engineering
Influence of different moisture content on engineering properties of tamarind seeds
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 3 (2019): CIGR Journal - VI-Postharvest Technology and Process Engineering
Experimental free convection thin layer groundnut greenhouse drying
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 2 (2023): CIGR Journal - I-Land and Water Engineering
Fuzzy Water Irrigation System using Internet of Things
Abstract 1-5398 -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 1 (2020): CIGR Journal - VI-Postharvest Technology and Process Engineering
Development and Performance Analysis of Low Cost Combined Harvester for Rabi Crops
Abstract Untitled PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 3 (2019): CIGR Journal - III-Equipment Engineering for Plant Production
Design of seed metering system for jute seeds
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 4 (2019): CIGR Journal - I-Land and Water Engineering
Dry and wet spell probability analysis by Markov chain model for Kohima ( Nagaland), India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 2 (2020): CIGR Journal - VI-Postharvest Technology and Process Engineering
Requirements of mixed tangerine (Citrus tangerine) and pineapple (Ananas comosus) powdered peel wastes fermentation for citric acid production
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 2 (2020): CIGR Journal - VI-Postharvest Technology and Process Engineering
Nutrient, antioxidant and anti nutrient composition of value added products made with underutilized forest produce Bay leaf (Cinnamomum tamala)
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 3 (2020): CIGR Journal - VI-Postharvest Technology and Process Engineering
Optimization of Process Variables for Osmo- freeze drying of Strawberry Slices Using Response Surface Methodology
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 3 (2021): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of thin layer drying on quality parameters of betel leaf (Piper betle L.)
Abstract 31-5668 -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 3 (2020): CIGR Journal - IV-Energy in Agriculture
Economic evaluation of a business model of selected solar thermal devices in Thar Desert of Rajasthan, India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 1 (2023): CIGR Journal - III-Equipment Engineering for Plant Production
Design and development of a vertical plate precision seed metering device with positive seed knockout mechanism
Abstract 3-5831 -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 3 (2020): CIGR Journal - III-Equipment Engineering for Plant Production
EFFECT OF COB SIZE AND MOISTURE CONTENT ON SHELLING PERFORMANCE OF LEVER OPERATED MAIZE COB SHELLER
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 3 (2021): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Ergonomic evaluation of battery operated knapsack sprayer
Abstract 19-5979 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 4 (2023): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Agricultural Accidents and Ergonomic intervention in Agricultural Machinery Design in India
Abstract 14-6039 -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 4 (2020): CIGR Journal - VI-Postharvest Technology and Process Engineering
Developing a mixed solar drier for improved postharvest handling of food grains
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 1 (2021): CIGR Journal - VI-Postharvest Technology and Process Engineering
Effect of Tannase (Aspergillus ficcum) on physicochemical properties of clarified Jamun juice
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 2 (2021): CIGR Journal - VI-Postharvest Technology and Process Engineering
Optimization of a De-skinning process parameters for roasted peanuts
Abstract 28-6521 -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 3 (2021): CIGR Journal - VI-Postharvest Technology and Process Engineering
Development of weight grader for dehusked coconut
Abstract 23-6591 -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 3 (2021): CIGR Journal - I-Land and Water Engineering
Evaluation of Valiantzas ET0 Equations against FAO56-PM Model in Indian Semi-arid Climatic Conditions
Abstract 1-6651 -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 3 (2021): CIGR Journal - I-Land and Water Engineering
Estimation of infiltration rate of a paddy growing area in a micro watershed of Sikkim, India
Abstract 2-6659 -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 2 (2021): CIGR Journal - III-Equipment Engineering for Plant Production
Development of a Manually Drawn Single Row Onion Set Planter Using a 2 DOF Robotic Arm
Abstract 18-6683 -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 4 (2021): CIGR Journal - VI-Postharvest Technology and Process Engineering
A divergent type grader for cocoa pods (Theobroma cacao L.)
Abstract 28-7049 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 1 (2022): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Ergonomic intervention and Optimization for maximum permissible loads to be carried in Sherpa mode based on physiological criteria
Abstract 17-7087 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 1 (2022): CIGR Journal - III-Equipment Engineering for Plant Production
Adaption of Modified Brush Cutter for Rice Harvesting
Abstract 11-7103 -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 4 (2021): CIGR Journal - I-Land and Water Engineering
Models for crop parameters due to normal load of tractor and number of passes
Abstract 5-7105 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 3 (2022): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Anthropometry and strength parameterization of lower limb disabled individuals pertinent to agricultural and allied sector applications
Abstract 12-7133 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 2 (2023): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Wireless Channel Path-Loss Modelling for Agricultural and Vegetation Environments: A Survey
Abstract 14-7157 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 1 (2022): CIGR Journal - VI-Postharvest Technology and Process Engineering
Design and development of rotary disc type garlic clove peeling machine
Abstract 24-7231 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 1 (2022): CIGR Journal - I-Land and Water Engineering
Identification of Best Potential Evapotranspiration model for Estimating Reference Evapotranspiration for sub temperate climate: Almora, Uttarakhand
Abstract 4-7333 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 1 (2022): CIGR Journal - VI-Postharvest Technology and Process Engineering
Feed forward neural network and its reverse mapping aspects for the simulation of ginger drying kinetics
Abstract 29-7373 -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 4 (2022): CIGR Journal - VI-Postharvest Technology and Process Engineering
Design and Development of Walnut Cracking Machine
Abstract 12-7567 -
Agricultural Engineering International: CIGR Journal Vol. 25 No. 4 (2023): CIGR Journal - VI-Postharvest Technology and Process Engineering
Development and Evaluation of Palmyrah (Borassus Flabellifer L.) Fruit Pulp
Abstract 18-8099 -
Agricultural Engineering International: CIGR Journal Vol. 13 No. 1 (2011): CIGR Journal - III-Equipment Engineering for Plant Production
Evaluation of a power driven residue manager for no-till drills
Abstract Provisional PDF PDF -
Agricultural Engineering International: CIGR Journal Vol. 16 No. 2 (2014): CIGR Journal - III-Equipment Engineering for Plant Production
Comparative evaluation of manual cassava harvesting techniques in Kerala, India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 1 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Design, development and statistical optimization of ginger peeling machine
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 21 No. 1 (2019): CIGR Journal - III-Equipment Engineering for Plant Production
Structural Design Optimization for Pedal Operated Paddy Thresher using Response Surface Methodology
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 4 (2018): CIGR Journal - IV-Energy in Agriculture
Thermal modelling and performance assessment of a circular greenhouse with solar chimney assisted ventilation and fog Cooling
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 22 No. 3 (2020): CIGR Journal - I-Land and Water Engineering
Development of GIS Toolbar to Estimate Reference Evapotranspiration and Net Irrigation Requirement on Raster Based Approach
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 24 No. 1 (2022): CIGR Journal - IV-Energy in Agriculture
Analysis of changes in energy use pattern of wheat crop in two decades – A study of central India
Abstract 14-6999 -
Agricultural Engineering International: CIGR Journal Vol. 14 No. 4 (2012): CIGR Journal - VI-Postharvest Technology and Process Engineering
Ohmic processing of liquid whole egg, white egg and yolk
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 2 (2015): CIGR Journal - VII-Information Systems
Bit plane slicing technique to classify date varieties
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 17 No. 1 (2015): CIGR Journal - V-Management, Ergonomics and Systems Engineering
Isometric handgrip strength of agricultural workers from northeast region of India
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 23 No. 1 (2021): CIGR Journal - II-Farm Buildings and Construction
Long term study of declining animal usage in Indian agriculture
Abstract PDF -
Agricultural Engineering International: CIGR Journal Vol. 20 No. 3 (2018): CIGR Journal - VI-Postharvest Technology and Process Engineering
Utilizing visible and near infrared spectroscopy based on multi-class support vector machines classification to characterize olive oil adulteration
Abstract PDF