A comparative study on drying of basil leaves

Authors

  • Mansukhlal Ramjibhai Parmar Anand Agricultural University, Anand 388 110
  • Mahendrasinh T. Kumpavat Anand Agricultural University, Anand 388 110
  • Jayesh Sevantilal Doshi Anand Agricultural University, Anand 388 110
  • Shyamsundar S. Kapdi Anand Agricultural University, Anand 388 110

Keywords:

drying, drying characteristics, basil leaves, solar drying, tray drying, vacuum drying and fluidized bed drying

Abstract

Basil is a popular aromatic and annual herb growing in many regions of the world.  Immediately after its harvesting, the highly perishable raw material, i.e. leaves, have to be preserved against deterioration and spoilage.  More often, during peak period, most of the crop is lost/wasted due to lack of proper post-harvest processing techniques.  Drying is by far the most widely used treatment, which needs to be performed very carefully and preciously so as to preserve the aroma and color of the leaves.  Various drying treatments and experimental methods viz., solar drying, tray drying, vacuum drying and fluidized bed drying were carried out at the temperatures of45°C,55°Cand65°Cto find and suggest the optimum drying condition for acquiring quality dried basil leaves.  Results have revealed that ‘total drying time’ is considerably reduced with the increase in drying air temperatures from45°Cto65°C.  It could be recommended that for the best drying of basil leaves, the drying operation needs to be carried out in the fluidized bed dryer at 45ºC for 30 s steam blanched sample ensuring the best results in quality of basil leaves as compared to other methods and treatments whatever considered during present study.

Author Biographies

Mansukhlal Ramjibhai Parmar, Anand Agricultural University, Anand 388 110

Assistant Professor (Agril. Engg.),

Department of Meteorology,

Anand Agricultural University, Anand 388 110 

Mahendrasinh T. Kumpavat, Anand Agricultural University, Anand 388 110

Assistant Professor (Agril. Engg.),

College of Food Processing Technology and Bio-energy,

Anand Agricultural University, Anand 388 110 

Jayesh Sevantilal Doshi, Anand Agricultural University, Anand 388 110

Assistant Professor (Agril. Engg.),

Regional Research Station,

Anand Agricultural University, Anand 388 110 

Shyamsundar S. Kapdi, Anand Agricultural University, Anand 388 110

Professor & head,

Department of Bioenergy,

College of Food Processing Technology and Bio-energy,

Anand Agricultural University, Anand 388 110 

Downloads

Published

2017-06-12

Issue

Section

VI-Postharvest Technology and Process Engineering